- 1 Introduction
- 2 Installing and loading the package
- 3 Input data
- 4 Workflow
- 4.1 Visualizing genome characteristics and mutational signatures
- 4.2 Explained variance as a function of the number of signatures
- 4.3 Decomposing tumor genomes by signature refitting (contribution prediction)
- 4.4 Re-composing/reconstructing tumor genomes from exposures and signatures
- 4.5 Mapping and comparing sets of signatures

The R package **decompTumor2Sig** has been developed to decompose individual
tumor genomes (i.e., the lists of somatic single nucleotide variants identified
in individual tumors) according to a set of given mutational signatures—a
problem termed signature refitting—using a quadratic-programming approach.

Mutational signatures can be either of the form initially proposed by Alexandrov et al. (Cell Rep. 3:246–259, 2013 and Nature 500:415–421, 2013)—in the following called “Alexandrov signatures”—or of the simplified form proposed by Shiraishi et al. (PLoS Genet. 11:e1005657, 2015)—in the following called “Shiraishi signatures”.

For each of the given mutational signatures, **decompTumor2Sig** determines
their contribution to the load of somatic mutations observed in a tumor.

*Note*: for all functions provided by **decompTumor2Sig**, please see the
manual or the inline R help page for further details and explanations.

*Note*: here and in the following, when referring to “mutations”, we intend
single nucleotide variants (SNVs).

Krüger S, Piro RM (2018) decompTumor2Sig: Identification of mutational signatures active in individual tumors. BMC Bioinformatics (accepted for publication).

Krüger S, Piro RM (2017) Identification of mutational signatures active in individual tumors.

PeerJ Preprints5:e3257v1 (Proceedings of the NETTAB 2017 Workshop on Methods, Tools & Platforms for Personalized Medicine in the Big Data Era, October 16-18, 2017 in Palermo, Italy).

BibTeX:

```
@UNPUBLISHED(krueger-decompTumor2Sig-paper,
author = "Kr{\"u}ger, Sandra and Piro, Rosario Michael",
title = "decompTumor2Sig: Identification of mutational signatures active in individual tumors",
journal = "BMC Bioinformatics",
note = "(accepted for publication)",
year = 2018
);
@ARTICLE(krueger-decompTumor2Sig-nettab,
author = "Kr{\"u}ger, Sandra and Piro, Rosario Michael",
title = "Identification of mutational signatures active in individual tumors",
journal = "PeerJ Preprints",
volume = "5",
number = "e3257v1",
year = 2017
);
```

**decompTumor2Sig** requires several CRAN and Bioconductor R packages to be
installed. Dependencies are usually handled automatically, when installing the
package using the following commands:

```
install.packages("BiocManager")
BiocManager::install("decompTumor2Sig")
```

[NOTE: Ignore the first line if you already have installed the
*BiocManager*.]

In the unlikely case that a manual installation is required, e.g., if you do
not install **decompTumor2Sig** via Bioconductor (which is highly recommended),
before installing **decompTumor2Sig** make sure the following packages are
installed:

CRAN packages:

*Matrix*, *quadprog*, *vcfR*,
*plyr*, *ggplot2*, *ggseqlogo*,
*gridExtra*

Bioconductor packages:

*GenomicRanges*, *GenomicFeatures*,
*Biostrings*, *BiocGenerics*,
*S4Vectors*, *BSgenome.Hsapiens.UCSC.hg19*,
*TxDb.Hsapiens.UCSC.hg19.knownGene*,
*VariantAnnotation*, *SummarizedExperiment*

If you intend to work with Shiraishi-type signatures, you may also want to
install the R package *pmsignature* which is neither part of
CRAN nor of Bioconductor and must be downloaded and installed manually
(available at: https://github.com/friend1ws/pmsignature).

CRAN packages can be installed from R using the following command:

`install.packages("<package_name>")`

Bioconductor packages can be installed from R using the following command:

`BiocManager::install("<package_name>")`

Sometimes, it may also be useful to update Bioconductor:

`BiocManager::install()`

Finally, the manual installation of **decompTumor2Sig** can, for example, be
done from the command line …

`R CMD INSTALL decompTumor2Sig_<version>.tar.gz`

… or the newest version can directly be installed from GitHub using the
CRAN package *devtools*:

```
library(devtools)
install_github("rmpiro/decompTumor2Sig")
```

After installation, loading the package is simple:

`library(decompTumor2Sig)`

**decompTumor2Sig** works with two kinds of input data:

- a set of given mutational signatures, and
- a set of somatic mutations (single nucleotide variants) observed in a tumor genome.

Additionally, **decompTumor2Sig** requires the genomic sequence (in form of a
*BSgenome* object) to determine neighboring nucleotides of the
mutated bases. It may also require transcript annotations (in form of a
*TxDb* object) in case the given mutational signatures take
information on the transcription direction into account.

Mutational signatures can be read in two different formats: Alexandrov-type signatures and Shiraishi-type signatures.

Alexandrov signatures are specified either in the format used at the COSMIC Mutational Signatures website for signatures version 2 (March 2015, see http://cancer.sanger.ac.uk/cosmic/signatures_v2 -> “Download signatures”), or in the format used for signatures version 3 (May 2019; see https://cancer.sanger.ac.uk/cosmic/signatures/SBS/ and https://www.synapse.org/#!Synapse:syn12009743). For version 3, only Single Base Substitution (SBS) signatures can be used.

Example for version 2:

```
Substitution Type Trinucleotide Somatic Mutation Type Signature 1 ...
C>A ACA A[C>A]A 0.011098326166 ...
C>A ACC A[C>A]C 0.009149340734 ...
C>A ACG A[C>A]G 0.001490070468 ...
C>A ACT A[C>A]T 0.006233885236 ...
...
T>G TTG T[T>G]G 0.002031076880 ...
T>G TTT T[T>G]T 0.004030128160 ...
```

Example for version 3:

```
Type,SubType,SBS1,SBS2,SBS3,SBS4,SBS5,SBS6, ...
C>A,ACA,8.86E-04,5.80E-07,2.08E-02,4.22E-02,1.20E-02,4.25E-04, ...
C>A,ACC,2.28E-03,1.48E-04,1.65E-02,3.33E-02,9.44E-03,5.24E-04, ...
C>A,ACG,1.77E-04,5.23E-05,1.75E-03,1.56E-02,1.85E-03,5.20E-05, ...
C>A,ACT,1.28E-03,9.78E-05,1.22E-02,2.95E-02,6.61E-03,1.80E-04, ...
...
T>G,TTG,5.83E-04,9.54E-05,8.05E-03,2.32E-03,6.94E-03,3.24E-04, ...
T>G,TTT,2.23E-16,2.23E-16,1.05E-02,5.68E-04,1.35E-02,1.01E-03, ...
```

(Apart from the change of tab- to comma-separator, the main difference is the lack of the redundant 3rd annotation column in version 3.)

The standard Alexandrov-type signatures report mutation frequencies for nucleotide triplets where the mutated base is at the center. Also, the basic Alexandrov signatures do not take transcription direction into account when computing mutation frequencies.

To read Alexandrov-type signatures, use the command
**readAlexandrovSignatures()**. By default, the command reads the version 2 (!)
signatures directly from COSMIC and stores them in a list object:

```
signatures <- readAlexandrovSignatures()
length(signatures)
```

`## [1] 30`

`signatures[1]`

```
## $Signature.1
## A[C>A]A A[C>A]C A[C>A]G A[C>A]T C[C>A]A
## 1.109833e-02 9.149341e-03 1.490070e-03 6.233885e-03 6.595870e-03
## C[C>A]C C[C>A]G C[C>A]T G[C>A]A G[C>A]C
## 7.342368e-03 8.928404e-04 7.186582e-03 8.232604e-03 5.758021e-03
## G[C>A]G G[C>A]T T[C>A]A T[C>A]C T[C>A]G
## 6.163352e-04 4.459080e-03 1.225006e-02 1.116223e-02 2.275496e-03
## T[C>A]T A[C>G]A A[C>G]C A[C>G]G A[C>G]T
## 1.525910e-02 1.801068e-03 2.580909e-03 5.925480e-04 2.963986e-03
## C[C>G]A C[C>G]C C[C>G]G C[C>G]T G[C>G]A
## 1.284983e-03 7.021348e-04 5.062896e-04 1.381543e-03 6.021227e-04
## G[C>G]C G[C>G]G G[C>G]T T[C>G]A T[C>G]C
## 2.393352e-03 2.485340e-07 8.900807e-04 1.874853e-03 2.067419e-03
## T[C>G]G T[C>G]T A[C>T]A A[C>T]C A[C>T]G
## 3.048970e-04 3.151574e-03 2.951453e-02 1.432275e-02 1.716469e-01
## A[C>T]T C[C>T]A C[C>T]C C[C>T]G C[C>T]T
## 1.262376e-02 2.089645e-02 1.850170e-02 9.557722e-02 1.711331e-02
## G[C>T]A G[C>T]C G[C>T]G G[C>T]T T[C>T]A
## 2.494381e-02 2.716149e-02 1.035708e-01 1.768985e-02 1.449210e-02
## T[C>T]C T[C>T]G T[C>T]T A[T>A]A A[T>A]C
## 1.768078e-02 7.600222e-02 1.376170e-02 4.021520e-03 2.371144e-03
## A[T>A]G A[T>A]T C[T>A]A C[T>A]C C[T>A]G
## 2.810910e-03 8.360909e-03 1.182587e-03 1.903167e-03 1.487961e-03
## C[T>A]T G[T>A]A G[T>A]C G[T>A]G G[T>A]T
## 2.179344e-03 6.892894e-04 5.524095e-04 1.200229e-03 2.107137e-03
## T[T>A]A T[T>A]C T[T>A]G T[T>A]T A[T>C]A
## 5.600155e-03 1.999079e-03 1.090066e-03 3.981023e-03 1.391577e-02
## A[T>C]C A[T>C]G A[T>C]T C[T>C]A C[T>C]C
## 6.274961e-03 1.013764e-02 9.256316e-03 4.176675e-03 5.252593e-03
## C[T>C]G C[T>C]T G[T>C]A G[T>C]C G[T>C]G
## 7.013225e-03 6.713813e-03 1.124784e-02 6.999724e-03 4.977593e-03
## G[T>C]T T[T>C]A T[T>C]C T[T>C]G T[T>C]T
## 1.066741e-02 8.073616e-03 4.857381e-03 8.325454e-03 6.257106e-03
## A[T>G]A A[T>G]C A[T>G]G A[T>G]T C[T>G]A
## 1.587636e-03 1.784091e-03 1.385831e-03 3.158539e-03 3.026912e-04
## C[T>G]C C[T>G]G C[T>G]T G[T>G]A G[T>G]C
## 2.098502e-03 1.599549e-03 2.758538e-03 9.904500e-05 2.023656e-04
## G[T>G]G G[T>G]T T[T>G]A T[T>G]C T[T>G]G
## 1.188353e-03 8.007233e-04 1.397554e-03 1.291737e-03 2.031077e-03
## T[T>G]T
## 4.030128e-03
```

Alternatively, the signatures can be read from a file of the format shown above:

`signatures <- readAlexandrovSignatures(file="<signature_file>")`

Shiraishi signatures are specified as matrices (in flat files without headers and row names; one file per signature).

Format (see Shiraishi et al. PLoS Genetics 11(12):e1005657, 2015):

The first row: Frequencies of the six possible base changes C>A, C>G, C>T, T>A, T>C, and T>G. Please note that due to the complementarity of base pairing these six base changes already include A>? and G>?.

The following

*2k*rows (for*k*up- and downstream flanking bases): Frequencies of the bases A, C, G, and T, followed by two 0 values.The optional last row (only if transcription direction is considered): Frequencies of occurrences on the transcription strand, and on the opposite strand, followed by four 0 values.

Example:

```
0.05606328 0.07038910 0.39331059 0.13103780 0.20797476 0.14122446
0.27758477 0.21075424 0.23543226 0.27622874 0 0
0.33081021 0.25347427 0.23662536 0.17909016 0 0
0.21472304 2.6656e-09 0.55231053 0.23296643 0 0
0.22640542 0.20024237 0.32113377 0.25221844 0 0
0.50140066 0.49859934 0 0 0 0
```

Among its examples, the **decompTumor2Sig** package provides a small set of
four Shiraishi-type signatures in flat files. These signatures were obtained
from 21 breast cancer genomes (Nik-Zainal et al. Cell 149:979–993, 2012) using
the R package *pmsignature* (Shiraishi et al. PLoS Genet.
11:e1005657, 2015).

To read these flat files as signatures, you can use the following example:

```
# take the example signature flat files provided with decompTumor2Sig
sigfiles <- system.file("extdata",
paste0("Nik-Zainal_PMID_22608084-pmsignature-sig",1:4,".tsv"),
package="decompTumor2Sig")
# read the signature flat files
signatures <- readShiraishiSignatures(files=sigfiles)
signatures[1]
```

```
## $`Nik-Zainal_PMID_22608084-pmsignature-sig1.tsv`
## [C>A] [C>G] [C>T] [T>A] [T>C] [T>G]
## mut 0.05606328 7.038910e-02 0.3933106 0.1310378 0.2079748 0.1412245
## -2 0.27758477 2.107542e-01 0.2354323 0.2762287 0.0000000 0.0000000
## -1 0.33081021 2.534743e-01 0.2366254 0.1790902 0.0000000 0.0000000
## +1 0.21472304 2.665627e-09 0.5523105 0.2329664 0.0000000 0.0000000
## +2 0.22640542 2.002424e-01 0.3211338 0.2522184 0.0000000 0.0000000
## tr 0.50140066 4.985993e-01 0.0000000 0.0000000 0.0000000 0.0000000
```

The third possibility is to convert Shiraishi-type signatures directly from
the package that computes them (*pmsignature*; Shiraishi et
al. PLoS Genet. 11:e1005657, 2015).

Example workflow:

```
# load example signatures for breast cancer genomes from Nik-Zainal et al
# (PMID: 22608084) in the format produced by pmsignature (PMID: 26630308)
pmsigdata <- system.file("extdata",
"Nik-Zainal_PMID_22608084-pmsignature-Param.Rdata",
package="decompTumor2Sig")
load(pmsigdata)
# extract the signatures from the pmsignature 'Param' object
signatures <- getSignaturesFromEstParam(Param)
signatures[1]
```

```
## [[1]]
## [C>A] [C>G] [C>T] [T>A] [T>C] [T>G]
## mut 0.05606328 7.038910e-02 0.3933106 0.1310378 0.2079748 0.1412245
## -2 0.27758477 2.107542e-01 0.2354323 0.2762287 0.0000000 0.0000000
## -1 0.33081021 2.534743e-01 0.2366254 0.1790902 0.0000000 0.0000000
## +1 0.21472304 2.665627e-09 0.5523105 0.2329664 0.0000000 0.0000000
## +2 0.22640542 2.002424e-01 0.3211338 0.2522184 0.0000000 0.0000000
## tr 0.50140066 4.985993e-01 0.0000000 0.0000000 0.0000000 0.0000000
```

Please note that *pmsignature* is neither part of CRAN nor of
Bioconductor and must be downloaded and installed manually (available at:
https://github.com/friend1ws/pmsignature). To load mutational signatures
without *pmsignature* being installed, see the previous sections.

An Alexandrov-type signature can be converted into a Shiraishi-type signature
(but not *vice versa* due to the loss of information). Consider the following
example:

```
sign_a <- readAlexandrovSignatures()
sign_s <- convertAlexandrov2Shiraishi(sign_a)
sign_s[1]
```

```
## $Signature.1
## [C>A] [C>G] [C>T] [T>A] [T>C] [T>G]
## mut 0.1100022 0.02309801 0.6754994 0.04153693 0.1241471 0.02571636
## -1 0.3290833 0.21464994 0.2370499 0.21921681 0.0000000 0.00000000
## +1 0.1858812 0.15440965 0.4967238 0.16298544 0.0000000 0.00000000
```

*Note*: since the standard Alexandrov-type signatures regard nucleotide
triplets and do not take transcription direction into account, the obtained
Shiraishi-type signatures will also be limited to triplets without information
about transcription direction.

**Important**: Please be aware that signatures are initially not determined in
isolation but as a set of signatures derived from a commonly large set of tumor
genomes (Alexandrov et al. Cell Rep. 3:246–259, 2013; Alexandrov et al. Nature
500:415–421, 2013; Shiraishi et al. PLoS Genet. 11:e1005657, 2015). Therefore,
the biological meaning of converting signatures is not well defined, and the
approach should be taken with caution! As an example for the possible outcome,
please see our paper (Krüger and Piro, 2018).

For certain applications it may be necessary to construct signatures or
convert them from other kind of data. To do so, each signature must be either
a numeric *vector* of probabilities which sum up to 1 (for Alexandrov-type
signatures) or a *matrix* or *data.frame* with six numeric columns, every row
of which sums up to 1 (for Shiraishi-type signatures).

A set of signatures is then simply a *list* of such signatures.

To verify whether a signature set has a format that can be used with
**decompTumor2Sig** the package provides the following set of functions. Since
the mutation frequencies in genomes are specified in exactly the same way,
these functions can be used for both signatures and genomes:

**isAlexandrovSet()**: Verify whether a list object (set of signatures or genomes) is compatible with the Alexandrov model.**isShiraishiSet()**: Verify whether a list object (set of signatures or genomes) is compatible with the Shiraishi model.**isSignatureSet()**: Verify whether a list object (set of signatures or genomes) is compatible with either the Alexandrov or the Shiraishi model.**sameSignatureFormat()**: Verify whether two list objects (two sets of signatures or genomes) contain signatures/genomes of the same format.

Examples:

`isAlexandrovSet(sign_a)`

`## [1] TRUE`

`isSignatureSet(sign_a)`

`## [1] TRUE`

`isShiraishiSet(sign_s)`

`## [1] TRUE`

`isSignatureSet(sign_s)`

`## [1] TRUE`

`sameSignatureFormat(sign_a, sign_s)`

`## [1] FALSE`

Information on the somatic mutations found in a tumor can be read from one of
the following formats and converted to mutation frequencies for
**decompTumor2Sig**.

The somatic mutations of a tumor genome can be read from a VCF file. For detailed information on this format (including an example), see https://samtools.github.io/hts-specs/VCFv4.2.pdf.

Mutations from multiple tumor genomes can also be read from a multi-sample VCF file.

As an example, the **decompTumor2Sig** package provides the somatic mutations
for a subset of six of the 21 breast cancer genomes originally published by
Nik-Zainal et al (Cell 149:979–993, 2012). The dataset has been converted
from MPF (see below) to VCF.

Example workflow:

```
# load the reference genome and the transcript annotation database
refGenome <- BSgenome.Hsapiens.UCSC.hg19::BSgenome.Hsapiens.UCSC.hg19
transcriptAnno <-
TxDb.Hsapiens.UCSC.hg19.knownGene::TxDb.Hsapiens.UCSC.hg19.knownGene
# take the six breast cancer genomes from Nik-Zainal et al (PMID: 22608084)
gfile <- system.file("extdata",
"Nik-Zainal_PMID_22608084-VCF-convertedfromMPF.vcf.gz",
package="decompTumor2Sig")
# read the cancer genomes in VCF format
genomes <- readGenomesFromVCF(gfile, numBases=5, type="Shiraishi",
trDir=TRUE, refGenome=refGenome,
transcriptAnno=transcriptAnno, verbose=FALSE)
length(genomes)
```

`## [1] 6`

`genomes[1:2]`

```
## $PD3851a
## [C>A] [C>G] [C>T] [T>A] [T>C] [T>G]
## mut 0.1902098 0.1048951 0.3482517 0.1160839 0.1566434 0.08391608
## -2 0.2573427 0.2307692 0.1860140 0.3258741 0.0000000 0.00000000
## -1 0.2867133 0.2405594 0.1762238 0.2965035 0.0000000 0.00000000
## +1 0.2839161 0.1902098 0.2685315 0.2573427 0.0000000 0.00000000
## +2 0.2741259 0.2167832 0.1972028 0.3118881 0.0000000 0.00000000
## tr 0.4699301 0.5300699 0.0000000 0.0000000 0.0000000 0.00000000
##
## $PD3890a
## [C>A] [C>G] [C>T] [T>A] [T>C] [T>G]
## mut 0.1545082 0.2471311 0.2323770 0.1176230 0.1315574 0.1168033
## -2 0.3016393 0.2118852 0.1918033 0.2946721 0.0000000 0.0000000
## -1 0.2372951 0.2311475 0.1622951 0.3692623 0.0000000 0.0000000
## +1 0.2954918 0.2086066 0.1545082 0.3413934 0.0000000 0.0000000
## +2 0.2913934 0.1979508 0.1885246 0.3221311 0.0000000 0.0000000
## tr 0.4852459 0.5147541 0.0000000 0.0000000 0.0000000 0.0000000
```

When reading somatic mutations of tumor genomes with **readGenomesFromVCF()**,
they are preprocessed to determine mutation frequencies according to specific
sequence characteristics which can be controlled by the following arguments:

*type*: Type of signatures that will be used with the genomes, “Shiraishi” or “Alexandrov”.*numBases*: The odd number of nucleotides/bases of the mutated sequence (where the mutated base is at the center).*trDir*: Whether the transcription direction should be taken into account (default: TRUE). If so, only mutations located within genomic regions for which a transcript direction is defined will be considered.*refGenome*: The reference genome from which to obtain the flanking bases of the mutated base.*transcriptAnno*: The transcript annotation database from which to obtain the transcription direction (if needed, i.e., if*trDir*=TRUE).*enforceUniqueTrDir*: If*trDir*is TRUE, then by default each mutation which maps to a region with multiple overlapping genes with opposing transcription directions will be excluded from the analysis. This is because from mutation data alone it cannot be inferred which of the two genes has the higher transcription activity which might potentially be linked to the occurrence of the mutation. Until version 1.3.5 of**decompTumor2Sig**the behavior for mutations associated with two valid transcription directions was different: the transcript direction encountered first in the transcript database (specified with*transcriptAnno*) was assigned to the mutation; the latter is also the default behavior of the*pmsignature*package. If you need to reproduce the old behavior—which basically arbitrarily assigns one of the two transcriptions strands—then you can set*enforceUniqueTrDir*=FALSE (this option exists mostly for backward compatibility with older versions), but it is recommended to entirely exclude mutations without ambiguous transcription strands. Note: this option is ignored when*trDir*=FALSE, where all mutations can be used.

Alternatively, somatic mutations can be read from an MPF file.

Example MPF file:

```
patient1 chr1 809687 G C
patient1 chr1 819245 G T
patient1 chr2 2818266 A G
patient1 chr2 3433314 G A
patient2 chr1 2927666 A G
patient2 chr1 3359791 C T
```

The five columns contain

- the name of the sample (or tumor ID);
- the chromosome name;
- the position on the chromosome;
- the reference base at that position (A, C, G, or T);
- the alternate or variant base (A, C, G, or T).

Hence, with an MPF file, too, multiple tumors can be described.

As an example, the **decompTumor2Sig** package provides the somatic mutations
for six of the 21 breast cancer genomes originally published by Nik-Zainal et
al (Cell 149:979–993, 2012).

Example workflow:

```
# load the reference genome and the transcript annotation database
refGenome <- BSgenome.Hsapiens.UCSC.hg19::BSgenome.Hsapiens.UCSC.hg19
transcriptAnno <-
TxDb.Hsapiens.UCSC.hg19.knownGene::TxDb.Hsapiens.UCSC.hg19.knownGene
# take the six breast cancer genomes from Nik-Zainal et al (PMID: 22608084)
gfile <- system.file("extdata", "Nik-Zainal_PMID_22608084-MPF.txt.gz",
package="decompTumor2Sig")
# read the cancer genomes in MPF format
genomes <- readGenomesFromMPF(gfile, numBases=5, type="Shiraishi",
trDir=TRUE, refGenome=refGenome,
transcriptAnno=transcriptAnno, verbose=FALSE)
```

Note: the preprocessing of the somatic mutations into mutation frequencies can
be controlled with the same function arguments that have been described above
for **readGenomesFromVCF()**.

The third possibility to get the somatic mutations from one or more tumor
genomes is to convert them directly from a tumor data object
(*MutationFeatureData* object) loaded using the *pmsignature*
package (Shiraishi et al. PLoS Genet. 11:e1005657, 2015).

An example of such an object is provided with **decompTumor2Sig**:

```
# get breast cancer genomes from Nik-Zainal et al (PMID: 22608084)
# in the format produced by pmsignature (PMID: 26630308)
pmsigdata <- system.file("extdata",
"Nik-Zainal_PMID_22608084-pmsignature-G.Rdata",
package="decompTumor2Sig")
load(pmsigdata)
# extract the genomes from the pmsignature 'G' object
genomes <- getGenomesFromMutFeatData(G, normalize=TRUE)
genomes[1]
```

```
## $PD3851a
## [C>A] [C>G] [C>T] [T>A] [T>C] [T>G]
## mut 0.1913161 0.1031208 0.3487110 0.1166893 0.156038 0.08412483
## -2 0.2605156 0.2306649 0.1831750 0.3256445 0.000000 0.00000000
## -1 0.2862958 0.2388060 0.1791045 0.2957938 0.000000 0.00000000
## +1 0.2795115 0.1886024 0.2686567 0.2632293 0.000000 0.00000000
## +2 0.2727273 0.2184532 0.1981004 0.3107191 0.000000 0.00000000
## tr 0.4735414 0.5264586 0.0000000 0.0000000 0.000000 0.00000000
```

Please note that *pmsignature* is neither part of CRAN nor of
Bioconductor and must be downloaded and installed manually (available at:
https://github.com/friend1ws/pmsignature). To read tumor genomes without
*pmsignature* being installed, see the previous sections about
VCF and MPF and the following section.

**Important**: the argument *normalize*, that can be specified for
**getGenomesFromMutFeatData()**, controls whether the function should simply
count the number of occurrences or whether it provides (normalized)
fractions/percentages of mutations among the total set. Normalization is the
default and is what **should be used** for determining the contribution of
individual signatures to the mutational load of a tumor. *normalize*=FALSE
should be used only in case you are interested in how many somatic mutations
of the single signature categories can be found in a tumor; it should not be
used for further processing with **decompTumor2Sig**!

**Important**: There is a slight difference on how *pmsignature*
and **decompTumor2Sig** preprocess mutations for counting them when taking the
transcription direction into account: For mutations which map to a region with
multiple overlapping genes with opposing transcription directions,
*pmsignature* assigns the transcript direction of the gene
encountered first in the transcript database (see also Section 3.2.1). This
was also the behavior of **decompTumor2Sig** until version 1.3.5 (used for
our papers; Krüger and Piro, 2017, 2018). In newer versions,
**decompTumor2Sig** excludes these mutations
by default from the count because from mutation data alone it cannot be
inferred which of the two genes has the higher transcriptional activity which
might potentially be linked to the occurrence of the mutation. However, when
converting data from *pmsignature* these mutations have already
been processed and can therefore not be excluded during the conversion.

The Bioconductor package *VariantAnnotation* provides the class
**VRanges** which can be used to store mutation information. **decompTumor2Sig**
allows to extract single nucleotide variants (SNVs) from such an object and
convert them into the tumor genomes’ mutation frequencies using the function
**convertGenomesFromVRanges()**, as in the following example workflow:

```
# load the reference genome and the transcript annotation database
refGenome <- BSgenome.Hsapiens.UCSC.hg19::BSgenome.Hsapiens.UCSC.hg19
transcriptAnno <-
TxDb.Hsapiens.UCSC.hg19.knownGene::TxDb.Hsapiens.UCSC.hg19.knownGene
# take six breast cancer genomes from Nik-Zainal et al (PMID: 22608084)
gfile <- system.file("extdata",
"Nik-Zainal_PMID_22608084-VCF-convertedfromMPF.vcf.gz",
package="decompTumor2Sig")
# get the corresponding VRanges object (using the VariantAnnotation package)
library(VariantAnnotation)
vr <- readVcfAsVRanges(gfile, genome="hg19")
# convert the VRanges object to the decompTumor2Sig format
genomes <- convertGenomesFromVRanges(vr, numBases=5, type="Shiraishi",
trDir=TRUE, refGenome=refGenome,
transcriptAnno=transcriptAnno,
verbose=FALSE)
```

Note: the preprocessing of the somatic mutations into mutation frequencies can
be controlled with the same function arguments that have been described above
for **readGenomesFromVCF()**.

Since the mutation data of genomes is specified as mutation probabilities and has exactly the same format as signatures, the format can be verified with the very same functions described in Section 3.1.5 (see above).

(*Note*: The following examples are for illustrative purpose only and need not
be biologically meaningful.)

Once both the tumor genome(s) and the given mutational signatures have been read (see above), the contribution of the given signatures to the somatic mutations in individual tumors can be determined using the following workflow.

In the following, we assume to have the signatures in a list object named
*signatures* and the mutation frequencies of the tumor genome(s) in another
list object named *genomes*.

**Important note**: it is imperative that the mutation frequencies represented
by both *signatures* and *genomes* have been computed with the same
characteristics. That is, if the *signatures* refer to sequences of 5
nucleotides/bases (with the mutated base at the center), then also the
*genomes* must have been read for 5 bases. If the *signatures* have been
produced taking the transcription direction into account, then also the
*genomes* must have been read taking the transcription direction into account,
and so on.

Given that the signatures and the genomes (if read appropriately) have the same format and contain the same type of information (fractions/percentages of somatic mutations that have specific features, e.g., specific neighboring bases), both can essentially be visualized in the same way.

The function **plotMutationDistribution()** takes as an input either a single
signature or the mutation frequencies of an individual tumor genome (either of
Alexandrov- or of Shiraishi-type) and plots the mutation frequency data
according to the signature model.

To plot, for example, Alexandrov/COSMIC signature 1 (obtained as described in Section 3.1.1):

```
signatures <- readAlexandrovSignatures()
plotMutationDistribution(signatures[[1]])
```

To plot one of the Shiraishi signatures provided with this package (see Section 3.1.2):

```
sigfiles <- system.file("extdata",
paste0("Nik-Zainal_PMID_22608084-pmsignature-sig",1:4,".tsv"),
package="decompTumor2Sig")
signatures <- readShiraishiSignatures(files=sigfiles)
plotMutationDistribution(signatures[[1]])
```

**decompTumor2Sig**’s representation of the mutation frequency data of
Shiraishi-type signatures uses sequence logos for the flanking bases and the
variant bases (with the heights of the bases being proportional to their
probability/frequency). The two possibilities for the mutated central base
(**C** or **T**) are represented next to each other and their respective
frequency is indicated below. This side-by-side representation allows to
distinguish the probabilities of variant bases (on top) according to the
mutated base. Transcription strand bias (if information on transcription
direction is used) is shown in the upper right corner (frequency of mutations
on the transcription strand, “+”, and the opposite strand, “-”).

In the plot above, for example, **C** and **T** are nearly equally likely
to be mutated by the represented mutational process, but a mutated **C** most
frequently becomes a **T**, while a mutated **T** becomes one of the other
bases with roughly equal probability. Also, the mutational signature has next
to no strand bias.

This representation is similar to the way the *pmsignature*
package represents such signatures, as shown by the following example:

(This plot above was generated with *pmsignature* and serves only
for comparison, showing the same signature as above.)

To show that genome mutation frequencies can be represented in the same manner, the following example reads the tumor genomes provided with this package using the Alexandrov model (see Section 3.2.1) and plots the mutation frequencies of the first genome:

```
refGenome <- BSgenome.Hsapiens.UCSC.hg19::BSgenome.Hsapiens.UCSC.hg19
gfile <- system.file("extdata",
"Nik-Zainal_PMID_22608084-VCF-convertedfromMPF.vcf.gz",
package="decompTumor2Sig")
genomes <- readGenomesFromVCF(gfile, numBases=3, type="Alexandrov",
trDir=FALSE, refGenome=refGenome, verbose=FALSE)
plotMutationDistribution(genomes[[1]])
```

In many cases already a small subset of the given signatures is sufficient to explain the major part of the variance of the mutation frequencies observed in a single tumor genome.

The explained variance can be determined by comparing the true mutation frequencies \(g_i\) of the tumor genome—where \(i\) is one of the mutation features of the signature model (e.g., triplet mutations for Alexandrov signatures, or base changes or flanking bases for Shiraishi signatures)—to the mutation frequencies \(\hat{g}_i\) obtained when re-composing/reconstructing the mutation frequencies of the tumor genome from the mutational signatures and their computed exposures/contributions. (See Section 4.3 for computing the exposures/contributions, and Section 4.4 for reconstructing the mutation frequencies of a tumor.)

For the Alexandrov model, the explained variance can be estimated as:

\[ \mathrm{evar}=1-\frac{\sum_i{(g_i-\hat{g}_i)^2}}{\sum_i({g_i}-\bar{g})^2} \]

where the numerator is the residual sum of squares (RSS) between the predicted and true mutation frequencies of the tumor genome (i.e., the squared error), and the denominator can be interpreted as the deviation from a tumor genome with a uniform mutation frequency of 1/96 for each feature (which is precisely the average mutation frequency \(\bar{g}\)).

For the Shiraishi model, \(\bar{g}\) does not describe a tumor genome with uniform mutation frequencies, and hence the explained variance is estimated as:

\[\mathrm{evar}=1-\frac{\sum_i{(g_i-\hat{g}_i)^2}}{\sum_i({g_i}-{g}^{*}_i)^2}\]

where \(g^{*}\) is a uniform tumor model that uses mutation frequencies of 1/6 for the six possible base changes, 1/4 for each of the possible flanking bases, and 1/2 for each of the two possible transcription-strand directions. For more details, please see Krüger and Piro (2018).

The function **plotExplainedVariance()** allows to visually analyze how many
signatures are necessary to explain certain fractions of the variance of a
tumor genome’s mutational patterns.

For an increasing number *K* of signatures, the highest variance explained by
subsets of *K* signatures will be plotted. This can help to evaluate what
minimum threshold for the explained variance could be used to decompose tumor
genomes with the function **decomposeTumorGenomes()** (see below).

As a simple example, load a set of 15 Shiraishi-type signatures (object
*signatures*) provided with this package. These signatures were obtained with
the package *pmsignature* from a set of 435 tumor genomes with at
least 100 somatic mutations from ten different tumor entities (data from
Alexandrov et al. Nature 500:415-421, 2013; for the analysis, see our papers
mentioned in Section 1.1):

```
# load the 15 Shiraishi signatures obtained from
# 435 tumor genomes from Alexandrov et al.
sfile <- system.file("extdata",
"Alexandrov_PMID_23945592_435_tumors-pmsignature-15sig.Rdata",
package="decompTumor2Sig")
load(sfile)
length(signatures)
```

`## [1] 15`

`signatures[1]`

```
## [[1]]
## [,1] [,2] [,3] [,4] [,5] [,6]
## [1,] 6.431522e-13 2.320704e-02 2.293643e-79 0.64050260 0.1876257 0.1486647
## [2,] 2.916982e-01 2.059223e-01 2.043698e-01 0.29800971 0.0000000 0.0000000
## [3,] 2.239856e-01 4.126288e-01 1.982799e-01 0.16510571 0.0000000 0.0000000
## [4,] 9.822384e-02 7.036368e-14 8.147461e-01 0.08703009 0.0000000 0.0000000
## [5,] 2.524624e-01 1.965627e-01 2.681366e-01 0.28283839 0.0000000 0.0000000
## [6,] 4.422814e-01 5.577186e-01 0.000000e+00 0.00000000 0.0000000 0.0000000
```

This loads an object *signatures* with 15 Shiraishi signatures for mutated
subsequences of length 5 (five nucleotides with the mutated base at the center)
and taking transcription direction into account.

Now read the tumor genomes (object *genomes*) provided with this package, as
described in Section 3.2.1:

```
# load the reference genome and the transcript annotation database
refGenome <- BSgenome.Hsapiens.UCSC.hg19::BSgenome.Hsapiens.UCSC.hg19
transcriptAnno <-
TxDb.Hsapiens.UCSC.hg19.knownGene::TxDb.Hsapiens.UCSC.hg19.knownGene
# take six breast cancer genomes from Nik-Zainal et al (PMID: 22608084)
gfile <- system.file("extdata",
"Nik-Zainal_PMID_22608084-VCF-convertedfromMPF.vcf.gz",
package="decompTumor2Sig")
# read the cancer genomes in VCF format
genomes <- readGenomesFromVCF(gfile, numBases=5, type="Shiraishi",
trDir=TRUE, refGenome=refGenome,
transcriptAnno=transcriptAnno, verbose=FALSE)
```

The explained variance can be plotted only for a single tumor genome. Plotting the explained variance of the first tumor genome when using increasing subsets of the 15 mutational signatures (see above), for example, can be done with the following command:

```
plotExplainedVariance(genomes[[1]], signatures, minExplainedVariance=0.9,
minNumSignatures=2, maxNumSignatures=NULL,
greedySearch=TRUE)
```

The function **plotExplainedVariance()** takes the following arguments:

*genome*: The mutation frequencies of a single tumor genome (according to the Alexandrov or Shiraishi model).*signatures*: The set of given signatures (must be of the same model as the genome).*minExplainedVariance*(default is NULL): If specified, the smallest subset of signatures necessary to explain at least this fraction of the variance is highlighted in red (including the list of the signatures in the subset).*minNumSignatures*(default is 2): Take at least this minimum number of signatures.*maxNumSignatures*(default is NULL, i.e., all): If specified, take at most this maximum number of signatures.*greedySearch*(default is FALSE): If FALSE, the function will evaluate for each number of signatures*K***all**possible subsets of*K*signatures to compute the highest explained variance for*K*. This can take very long if the total number of given signatures is too high. If TRUE, first, all possible subsets with*K*=*minNumSignatures*are evaluated, taking the subset with the highest explained variance, then stepwise one additional signature (highest increase in explained variance) is added to the already identified set. This approximation is much faster but not guaranteed to plot the maximum explained variance for all*K*(a greedy search can get stuck in a local optimum).

This is the heart of the functionality of **decompTumor2Sig**, its main purpose.

Given a tumor genome and a set of mutational signatures (that represent
mutational processes like UV light, smoking, etc; see Alexandrov and Stratton,
Curr Opin Genet Dev 24:52-60, 2014), we would like to estimate how strongly the
different signatures (processes) contributed to the overall mutational load
observed in the tumor. To this end **decompTumor2Sig** relies on quadratic
programming. For details, see our paper (Krüger and Piro, 2018).

The result will be a vector of weights/contributions (or “exposures”) which indicate the fractions or percentages of somatic mutations which can likely be attributed to the given signatures.

Lets take, for instance, the signature and tumor data used for the example in Section 4.2 (see there).

To compute the contributions of the 15 given signatures to the first tumor genome, we can run the following command …

`exposure <- decomposeTumorGenomes(genomes[1], signatures)`

… and get the following *exposures* (contributions) for the 15 signatures:

`exposure`

```
## $PD3851a
## sign_1 sign_2 sign_3 sign_4 sign_5 sign_6
## 0.048859110 0.132178330 0.050850027 0.054031520 0.001450941 0.109720556
## sign_7 sign_8 sign_9 sign_10 sign_11 sign_12
## 0.095453994 0.049931644 0.030747503 0.091294629 0.025005691 0.032603285
## sign_13 sign_14 sign_15
## 0.037525747 0.194417963 0.045929061
```

The exposures/contributions for a single tumor genome can also be plotted:

`plotDecomposedContribution(exposure)`