Author: Zuguang Gu ( z.gu@dkfz.de )
Date: 2020-02-07
Package version: 1.3.4
Subgroup classification is a basic task in high-throughput genomic data analysis, especially for gene expression and DNA methylation data analysis. Mostly, unsupervised clustering methods are applied to predict new subgroups or to test the agreement with known annotations.
To test the stability of subgroup classifications, consensus clustering or consensus partitioning is always performed. It clusters repeatedly with a randomly sampled subset of data and summarizes the robustness of the clustering, finally, it gives a consensus classification of all samples.
Here we present the cola package which provides a general framework for consensus partitioning. It has the following advantages:
Following flowchart lists the general steps of consensus partitioning implemented by cola:
The steps are:
var()
or sd()
). Note the choice of “the top-value method” can be general. It can be e.g. MAD (median absolute deviation) or any user-defined
method.All the steps will be explained in detail in the following sections.
First, we load the cola package.
library(cola)
In most of the analysis tasks, the input matrix contains values of gene expression or DNA methylation (from methylation array or whole-genome bisulfite sequencing). If it is an expression matrix, rows correspond to genes, and if it is a methylation matrix, rows correspond to CpG sites. For both types of matrices, columns should always correspond to samples where subgroups are detected. More general, the input matrix can be any type of measurements as long as they represent in a form of a matrix, e.g. a matrix where rows are genomic regions and values are the histone modification intensities in the regions, measured from a ChIP-Seq experiment.
In following part of this vignette, we always call the matrix columns as “samples”.
Before performing consensus partitioning, a simple but important step is to clean the input matrix:
# code is only for demonstration
mat = adjust_matrix(mat)
adjust_matrix()
does the following preprocessing:
NA
values are removed;impute::impute.knn()
to impute missing data if there is any;adjust_outlier()
(also provided by
cola package) to adjust outliers. Values larger than the 95^{th}
percentile or less than the 5^{th} percentile are replaced by corresponding
percentiles.Some of the above steps are optional. For example, methylation matrix does not need to be adjusted for outliers because all the methylation values are already in a fixed data scale (0 ~ 1).
consensus_partition()
performs consensus partitioning for a single top-value
method and a single partitioning method. The major arguments for
consensus_partition()
are:
# code is only for demonstration
res = consensus_partition(mat,
top_value_method = "MAD",
top_n = c(1000, 2000, 3000, 4000, 5000),
partition_method = "kmeans",
max_k = 6,
p_sampling = 0.8,
partition_repeat = 50,
anno = NULL)
mat
: a data matrix where subgroups are found by columns.top_value_method
: name of the method to assign scores to
matrix rows. Later these scores are used to order and extract rows with top
values.top_n
: number of rows with top values used for partitioning. Normally we set
top_n
as a vector of different numbers.partition_method
: name of the method for partitioning.max_k
: maximal number of subgroups to try. It will try from 2 to max_k
.p_sampling
: the fraction of the top_n
rows to sample. The sub-matrix with
p_sample * top_n
rows is used for partitioning.partition_repeats
: times of partitioning with randomly sampled subset of data to perform.anno
: a vector or a data frame which contains known annotations of
samples. If it is provided, it will be drawn alongside with the predicted
subgroups in the plot generated by downstream functions and it can also be
tested for the correspondence to predicted subgroups.Other arguments can be found in the documentation of
consensus_partition()
.
To get a robust result from consensus partitioning, for a specific top-value
method and a specific partitioning method, consensus_partition()
tries
different top_n
and different number of subgroups. We found that different
top_n
might give different subgroups for some data sets, thus
consensus_partition()
pools results from different top_n
and aims to give
a general consensus subgrouping across different top_n
. Later, we will
introduce that the bias for top_n
on subgrouping can be visualized by
membership_heatmap()
function.
In most cases, users might not be very sure which top-value method and which
partitioning method is best for their dataset. The helper function
run_all_consensus_partition_methods()
is a convenient way to try multiple
top-value methods and multiple partitioning methods simultaneously to see which
combination of methods gives the best prediction of subgroups.
In run_all_consensus_partition_methods()
, most of the arguments are the same
as in consensus_partition()
, except top_value_method
and
partition_method
now accept a vector of method names and multiple cores can
be set by mc.cores
argument.
# code is only for demonstration
rl = run_all_consensus_partition_methods(mat,
top_value_method = c("SD", "MAD", ...),
partition_method = c("hclust", "kmeans", ...),
mc.cores = ...)
cola_report(rl, output_dir = ...)
There are many functions in cola package that can be applied to rl
to
visualize and compare the results for all combinations of methods
simultaneously.
cola_report()
function can be applied on rl
to generate a HTML report for
the complete analysis, with all the plots and tables.
Top-value methods are used to assign scores to matrix rows, later the scores are ordered and only the top \(n\) rows with the highest scores are used for consensus partitioning. The default top-value methods provided in the package are:
all_top_value_methods()
## [1] "SD" "CV" "MAD" "ATC"
These top methods are:
SD
: Standard deviation.CV
: Coefficient of
variance, defined
as sd/(mean + s0)
where s0
is a penalty term which is the 10^{th}
percentile of all row means to avoid small values dividing small values
giving large values.MAD
: Median absolute
deviation.ATC
: A new method proposed in cola package and it will be explained
later in this section.These methods can be used in consensus partitioning by providing the name to the
top_value_method
argument in run_all_consensus_partition_methods()
or
consensus_partition()
.
You can register a new top-value method by register_top_value_methods()
. The
value should be functions. For each function, it should only have one argument
which is the matrix for analysis and it must return a vector with scores for
rows. In the following example, the “max” method uses the row maximum as the row
score and we also add the “QCD” method (quartile coefficient of
dispersion)
as a second method here.
register_top_value_methods(
max = function(mat) matrixStats::rowMaxs(mat),
QCD = function(mat) {
qa = matrixStats::rowQuantiles(mat, probs = c(0.25, 0.75))
(qa[, 2] - qa[, 1])/(qa[, 2] + qa[, 1])
})
all_top_value_methods()
## [1] "SD" "CV" "MAD" "ATC" "max" "QCD"
By default, the consensus partitioning functions
run_all_consensus_partition_methods()
uses all registered top-value methods,
but still, you can explicitly specify a subset of top-value methods. To remove
registered top-value methods, simply use remove_top_value_methods()
by
providing a vector of names.
remove_top_value_methods(c("max", "QCD"))
all_top_value_methods()
## [1] "SD" "CV" "MAD" "ATC"
Choosing the top rows in the matrix is important for the subgroup classification. In most cases, we extract the most variable rows which is defined by row variance. However, sometimes it won't give you meaningful rows which are efficient for subgroup classification. When random noise in the data increases, e.g. for single-cell RNASeq data, the most variable genes are too weak to detect any stable subgroups.
If we think reversely, assuming there exist stable subgroups in the data, there must be groups of rows showing a similar pattern to support the subgrouping, in other words, rows in the same groups should have high correlations to each other. Thus, if we can get rows that more correlated to others, they are more strong to form a stable subgroup for the samples. According to this thought, we designed the ATC method (ability to correlate to other rows).
For row \(i\) in a matrix, \(X\) is a vector of the absolute correlation to all other rows, the ATC (ability to correlate to other rows) for row \(i\) is defined as:
\[ATC_i = 1 - \int_0^1F(x)\]
where \(F(x)\) is the CDF (cumulative distribution function) of \(X\).
In the following plot, the line is the CDF curve. ATC is the area above the CDF curve. It can be imagined that when row \(i\) correlates with more other rows, the CDF curve shifts more to the right, thus with higher ATC scores.
There can be scenarios when a large number of rows are correlated to each other only with very small correlation values. They will gain high ATC value due to a large number of rows (which corresponds to the left part of the red area in the above plot that is close to \(x = 0\)). To decrease such effect, the ATC definition can be slightly modified to:
\[ATC_i = (1 - \alpha) - \int_{\alpha}^1F(x^{\beta})\]
where now \(ATC_i\) is the red area only on the right of \(x = \alpha\). The coefficient \(\beta\) is the power added to the absolute correlations that it decreases more for the smaller correlations. By Default \(\alpha\) is set to 0 and \(\beta\) is set to 1.
Next, we perform a simulation test to show the attributes of the ATC method. A matrix with 160 rows, 100 columns with random values are generated as follows:
The top left figure in following is the heatmap for the random matrix, split by the three groups of rows. In the top right figure, they are ECDF curves of the correlation when calculating ATC scores. The bottom left figure is the ATC scores for all 160 rows and the bottom right figure is the standard deviation for the 160 rows.
All the 160 rows have a similar variance of 1 that they cannot be distinguished very well by using variance (bottom right figure). As a contrast, the rows with non-zero covariance have higher ATC values (the red and green points), even higher when the number of correlated rows increases (the green points, although the correlation value itself is intermediate, bottom left figure). This shows the ATC method can assign higher values for rows which correlate to more other rows.
ATC scores are calculated by ATC()
function. By default it uses Pearson
correlation. Users can register the ATC method with other correlation methods by,
e.g.:
# code is only for demonstration
register_top_value_methods(
ATC_spearman = function(m) ATC(m, method = "spearman"),
ATC_bicor = function(m) ATC(m, cor_fun = WGCNA::bicor)
)
Partitioning methods are used to separate samples into \(k\) subgroups where \(k\) is a known parameter for the partitioning. The default partitioning methods are:
all_partition_methods()
## [1] "hclust" "kmeans" "skmeans" "pam" "mclust"
## attr(,"scale_method")
## [1] "z-score" "z-score" "z-score" "z-score" "z-score"
These partitioning methods are:
hclust
: hierarchical clustering + cutree. The parameters for calling
hclust()
and dist()
are all defaults for the two functions, thus it is
Euclidean distance with “complete” clustering method.kmeans
: k-means clustering.skmeans
: spherical k-means clustering, from skmeans package.pam
: partitioning around medoids, from cluster package.mclust
: model-based clustering, from mclust package. The clustering is
based on the first three principle dimensions from the original matrix.Similarly, you can register a new partitioning method by
register_partition_methods()
. The value should be functions with two
arguments which are the input matrix and number of subgroups. There can be a
third argument for the function which is ...
used for passing more
arguments from consensus_partition()
. The function should only return a
vector of subgroup/class labels or an object that can be imported by
clue::cl_membership()
. Please note the partition is applied on columns of
the matrix and the number of unique levels of subgroup levels which are
predicted by the partitioning method should not exceed \(k\).
Following example registers a partitioning method which randomly assigns subgroup labels to samples:
register_partition_methods(
random = function(mat, k) {
sample(letters[1:k], ncol(mat), replace = TRUE)
}
)
Here the subgroup labels can be in any types (numbers, characters). They only need to be different for different classes. These labels will be re-coded with numeric indices internally (i.e. 1, 2, 3, …).
To remove a partitioning method, use remove_partition_methods()
:
remove_partition_methods("random")
The built-in hclust
method only uses Euclidean distance with “complete” clustering method,
It is easy to define another hclust
method:
# code is only for demonstration
register_partition_methods(
hclust_cor = function(mat, k) cutree(hclust(as.dist(1 - cor(mat))), k)
)
Following code registers SOM and NMF partitioning methods:
# code is only for demonstration
library(kohonen)
register_partition_methods(
SOM = function(mat, k, ...) {
kr = floor(sqrt(ncol(mat)))
somfit = som(t(mat), grid = somgrid(kr, kr, "hexagonal"), ...)
m = somfit$codes[[1]]
m = m[seq_len(nrow(m)) %in% somfit$unit.classif, ]
cl = cutree(hclust(dist(m)), k)
group = numeric(ncol(mat))
for(cl_unique in unique(cl)) {
ind = as.numeric(gsub("V", "", names(cl)[which(cl == cl_unique)]))
l = somfit$unit.classif %in% ind
group[l] = cl_unique
}
group
}
)
library(NMF)
register_partition_methods(
NMF = function(mat, k, ...) {
fit = nmf(mat, rank = k, ...)
apply(fit@fit@H, 2, which.max)
}, scale_method = "max-min"
)
For these two methods, users can simply use register_SOM()
and
register_NMF()
functions in cola package.
# code is only for demonstration
register_SOM()
register_NMF()
In the code above, there is an additional argument scale_method
for
register_partition_method()
. scale_method
controls how to scale the matrix
rows before partitioning if scaling is turned on consensus_partition()
or
run_all_consensus_partition_methods()
. There are three possible values:
z-score
: z-score transformation, which is (x - mean(x))/sd(x)
.max-min
: (x - min(x))/(max(x) - min(x))
, this ensures all the scaled
values are non-negative.none
: no scaling is performed.The skmeans method (the spherical k-means clustering) is powerful to detect subgroups where samples in the same subgroup show strong correlations. skmeans clustering uses cosine similarity and projects data points onto a unit hyper-sphere. As we have tested for many datasets, skmeans is very efficient to detect stable subgroups.
For a given number of top rows \(n_i\), the corresponding matrix with top rows denoted as \(M_i\), a subset of rows with a probability of \(p\) are randomly sampled from \(M_i\) and a certain partitioning method is applied to it, generating a partition \(P_a\). In most cases, we have no prior knowledge of which \(n_i\) gives better results, thus, cola allows to try multiple \(n_i\) and pool partitions from all \(n_i\) together to find a consensus subgrouping, which also lets rows more on the top of the ranked list give higher weight for determining the final subgroups. Let's assume top rows are tried for \(n_1\), \(n_2\), …, \(n_m\) and the randomly sampling is performed for \(N_s\) times, then, for a given number of subgroups \(k\) for trying, the total number of partitions is \(N_P = m*N_s\).
The consensus matrix measures how consistent two samples are in the same subgroup and it can be used to visualize or analysis the stability of the subgrouping. The value \(c_{ij}\) in the consensus matrix is the probability of sample \(i\) and sample \(j\) in the same subgroup in all \(N_P\) partitions. It is calculated as:
\[c_{ij} = \sum_a^{N_p}I(s_{ia}, s_{ja})/N_P\]
where \(s_{ia}\) is the subgroup label for sample \(i\) in partition \(a\) and \(I()\) is the indicator function there \(I(x = y) = 1\) and \(I(x \neq y) = 0\).
Assuming there are stable subgroups in a dataset, which means, for any pair of samples \(i\) and \(j\) both in a same subgroup, \(c_{ij}\) is close to 1, and for any pairs in different subgroups, \(c_{ij}\) is close to 0, if the consensus matrix is visualized as a heatmap, samples in the same subgroup will be represented as a block in the diagonal of the heatmap.
Following two heatmaps visualize two consensus matrices. The left one shows less stability of subgrouping than the right one, while for the right one, there are three very obvious blocks in the diagonal that in each block, the corresponding samples are very likely to be in the same subgroup.
In the following two heatmaps, the right one corresponds to a more stable subgrouping.
As long as we have a list of \(N_P\) partitions for a given subgroup number \(k\),
we need to find a consensus partition based on all \(N_P\)
partitions.Internally, cola package uses the clue package to construct
the “partition ensemble” and predict the consensus subgroups. The “SE” method
from clue::cl_consensus()
function (please check the on-line documentation
of this function) are used to calculate the consensus subgroup labels. The
consensus subgroups are labels by integers (i.e. 1, 2, 3, …).
The subgroup labels are assigned with numeric indices, however, in each partition, the assignment of the labels can be random, e.g. one same subgroup can be assigned with 1 in one partition, while in the other partition, it can be 2, but they are all identical for the sense of subgrouping. E.g. following partitions are all identical:
1 1 1 1 1 1 1 2 2 2 2 2 2
2 2 2 2 2 2 2 1 1 1 1 1 1
a a a a a a a b b b b b b
The subgroups are identical if switching the subgroup labels. This subgroup
label adjustment is called the linear sum assignment
problem, which is solved by
the solve_LSAP()
function in clue package. The aim is to find a mapping
\(m()\) between two sets of labels to maximize \(\sum_i I(s_{1i}, m(s_{2i}))\)
where \(s_1\) is the first label set and \(s_2\) is the second label set.
In following example, if the mapping is 1 -> 2, 2 -> 1
, the second partition
in following
1 1 1 1 1 1 1 2 2 2 2 2 # in partition 1
2 2 2 2 2 1 1 1 1 1 1 1 # in partition 2
is adjusted to
1 1 1 1 1 1 1 2 2 2 2 2
1 1 1 1 1 2 2 2 2 2 2 2 # switch 1 <-> 2
For the subgroups predicted by clue::cl_consensus()
, the labels are
additionally adjusted by the mean distance in each subgroup (calculated from
the scaled data matrix), which means, the subgroup with label 1 always has the
smallest mean intra-group distance.
This subgroup label adjustment is frequently used in cola to help the
visualization as well as downstream analysis. E.g. for a specific combination
of top-value method and partitioning method, the subgroup labels for different
k
are adjusted, and for the subgroups from different top-value methods and
partitioning methods, the subgroup labels are also adjusted to make the label
difference from different methods minimal.
The \(N_P\) partitions are stored as a membership matrix where rows are
partitions (grouped by top_n
) and the subgroup labels in each partition are
adjusted according to the consensus partition. Following heatmap is a
visualization of all partitions and correspondence to the consensus partition
for \(k = 2\). The p*
annotation on top of the heatmap is the probability of
being in subgroup \(i\) across all partitions.
In the following plot, actually we can see the samples in the middle tend to
belong to the green subgroup (the group with label 1) for small top_n
(e.g.
top_n = 1000
), while, when top_n
increases, they go to the red subgroup
(group label 2). Since the final subgroups are summarized from all top_n
,
the probabilities of the middle samples to be in either subgroup are
close, which can also be observed from the probability annotation (p*
annotations). This might indicate these are the subset of samples which are in
the intermediate state between group 1 and group 2.
Consensus partitioning is applied with a specific number of subgroups (we term it as \(k\)). Normally, a list of \(k\) are tried to find the best \(k\). cola provides metrics to help to determine the best number of subgroups.
The get_stats()
function returns statistics for all metrics mentioned below
and select_partition_number()
plots the statistics with the number of
subgroups (an example is here).
The silhouette scores measures how close one sample is in its own subgroup compared to the closest neighbouring subgroup. For sample \(i\), the mean distance to every subgroups are calculated, denoted as \(d_1\), \(d_2\), …, \(d_k\) (\(d_k\) is the mean Euclidean distance between sample \(i\) and every sample in subgroup \(s\)). The distance to the subgroup where sample \(i\) stays is denoted as \(d_a\) and the silhouette score is defined as:
\[silhouette_i = 1 - d_a/d_b\]
where \(d_b\) is the minimal distance excluding \(d_a\):
\[d_b = min_{j \neq a}^k d_j\]
Following plot illustrates how silhouette score is calculated for sample x_i
.
The mean silhouette score from all samples is used to choose the best \(k\) where higher the mean silhouette score, better the \(k\).
The PAC score measures the proportion of the ambiguous subgrouping. If the subgrouping is stable, in \(N_P\) partitions, sample \(i\) and sample \(j\), in most of the cases, are either always in the same subgroup, or always in different subgroups, which results in that, in the consensus matrix, the values are, in most cases, close to 1 or 0. Then in the CDF of the consensus matrix, the curve will be very flattened between \(x_1\) and \(x_2\) where \(x_1\) is very close to 0 and \(x_2\) is very close to 1 because there are very few values between \(x_1\) and \(x_2\). Thus, the proportion of sample pairs with consensus values in \((x_1, x_2)\) is called the proportion of the ambiguous clustering, which can be calculated by \(F(x_2) - F(x_1)\).
In the following plots, the red line in the left plot corresponds to the first consensus heatmap and the blue line corresponds to the second consensus heatmap that is more stable than the first one. It is quite obvious to see the second consensus heatmap has far less PAC value than the first one.
In some cases, \(F(x_1)\) or \(F(x_2)\) changes a lot when \(x_1\) has slight change around 0.1, or \(x_2\) has slight change around 0.9. Thus, to make PAC not so sensitive to the selection of \(x_1\) and \(x_2\), PAC value is calculated by removing 5% samples with lowest silhouette scores.
Smaller the PAC score, better the \(k\).
The concordance of partitions to the consensus partition is calculated as, for each partition \(P_a\), the probability that it fits the consensus partition:
\[c_{a} = \frac{1}{N_s}\sum_i^{N_s}I(s_{ia} = sc_i)\]
where \(N_s\) is the number of samples, \(s_{ia}\) is the subgroup label of sample \(i\) in partition \(a\) and \(sc_i\) is the consensus subgroup label for sample \(i\). Note class labels in single partitions have already been adjusted to the consensus partition labels.
The final concordance score is the mean value of \(c_a\). Higher the concordance score, better the \(k\).
It is the increased area under CDF of the consensus matrix compared to the previous \(k\).
\[A_k = \int F_k(x) - \int F_{k-1}(x)\]
and when \(k = 2\) or for the minimal \(k\):
\[A_k = \int F_k(x)\]
In follow example, there are five consensus heatmaps corresponding to \(k =2,3,4,5,6\). Note the number of subgroups that can be inferred from the consensus heatmap is not necessary to be exactly the same as \(k\). It can be smaller than \(k\).
The corresponding CDF curves and the area increased are:
The \(k\) before the elbow is taken as the best \(k\) (in the above example it is 3). Basically when \(k\) reaches a stable subgrouping, increasing \(k\) won't change the consensus matrix too much, which results in less change of the difference of The area under the CDF curve.
In some cases, when the number of subgroups changes from \(k-1\) to \(k\), all the
statistics imply \(k\) is a better choice than \(k-1\). However, when observing
the consensus heatmap, basically it is because a very small set of samples are
separated to form a new subgroup. In this case, it is better to still keep
\(k-1\) subgroups. In other words, the subgrouping with \(k\) is similar to
\(k-1\) and it is not worth to increase \(k\) from \(k-1\). In cola package,
there are two metrics: the Rand index and Jaccard index to measure the similarity
of two partitions for \(k-1\) and \(k\). The two metrics are calculated by
clue::cl_agreement(..., method = "Rand")
and clue::cl_agreement(..., method
= "Jaccard")
.
For all pairs of samples, denote following symbols (https://en.wikipedia.org/wiki/Rand_index#Definition):
the Rand index which is the percent of pairs of samples that are both in a same cluster or both are not in the same cluster in the partition of \(k\) and \(k-1\).
\[Rand = \frac{a+b}{a+b+c+d}\]
If Rand index is too high, it means the two subgroupings are very similar and it is not sufficient to increase from \(k-1\) to \(k\).
The Jaccard index is the ratio of pairs of samples that are both in a same subgroup in the partition of \(k\) and \(k-1\) and the pairs of samples are both in the same subgroup in the partition of \(k\) or \(k-1\).
\[Jaccard = \frac{a}{a+c+d}\]
In the following plots, when the number of subgroups increases from 3 to 4, there is only one single sample separated from other subgroups to form a new subgroup. The Rand index or the Jaccard index for \(k=4\) is close to 1, which means, the subgroups at \(k=4\) are highly similar as \(k=3\), thus we ignore \(k=4\) and take \(k=3\) as the better subgrouping.
cola provides a suggest_best_k()
function which suggests the best \(k\).
It is based on the following rules:
suggest_best_k()
only gives suggestion on selecting a reasonable \(k\).
Users still need to look at the plots (e.g. by select_partition_number()
or
consensus_heatmap()
functions), or even by checking whether the subgrouping
gives reasonable signatures by get_signatures()
, to pick a reasonable \(k\) that
best explains their studies.
As long as there are stable subgroups, we can look for rows which show A distinct difference in one subgroup compared to others. They can be called signature genes or signature CpG sites if the corresponding dataset is gene expression data or methylation data.
By default, samples with silhouette scores less than 0.5 are removed. cola provides the following methods:
Ftest
use F-test to find significantly different rows between subgroups.ttest
: First it looks for the subgroup with the highest mean value, compare to
each of the other subgroups with t-test and take the maximum p-value. Second
it looks for the subgroup with lowest mean value, compare to each of the
other subgroups again with t-test and take the maximum p-values. Later for
these two lists of p-values take the minimal p-value as the final p-value.samr
and pamr
: use
SAM/PAM
method to find significantly different rows between subgroups.one_vs_others
For each subgroup \(i\) in each row, it uses t-test to compare samples in current
subgroup to all other samples, denoted as \(p_i\). The p-value for current row is selected as \(min(p_i)\).Users can also provide their own method by providing a function with the matrix and subgroup labels as inputs and a vector of FDR as output.
If the matrix rows can correspond to genes (e.g. the gene expression matrix,
or the methylation array data where CpG sites can be annotated to the
transcription start site of genes), cola performs functional enrichment by
functional_enrichment()
function with hypergeometric test to the signatures
by ClusterProfiler, DOSE or ReactomePA packages. k-means clustering with
automatically selecting the number of groups of the signature is performed and
functional enrichment is applied to each row signature group, to the fact that
there may exist different expression patterns and genes involved may play
different functional roles.
consensus_partition()
is the core function for consensus partitioning. But
it can only perform analysis with a single top-value method and a single
partitioning method. In most cases, we have no idea of which combination of
top-value method and partitioning method gives better results. Here
run_all_consensus_partition_methods()
can perform analysis with multiple
methods simultaneously:
# code is only for demonstration
rl = run_all_consensus_partition_methods(mat,
top_value_method = c("SD", "MAD", ...),
partition_method = c("hclust", "kmeans", ...),
mc.cores = ...)
By default it runs analysis for all combinations of top-value methods in
all_top_value_methods()
and partitioning methods in all_partition_methods()
.
cola package provides functions to collect plots from all combinations of methods for straightforward comparisons.
# code is only for demonstration
collect_plots(rl, fun = consensus_heatmap, k = ...)
collect_plots(rl, fun = membership_heatmap, k = ...)
collect_plots(rl, fun = get_signatures, k = ...)
And collect_classes()
compares consensus partition from all methods:
# code is only for demonstration
collect_classes(rl, k = ...)
The plots from collect_plots()
and collect_classes()
can be found here.
cola is implemented in an object-oriented way. There are two main classes
where ConsensusPartition
class contains results for a single top-value method
and a single partitioning method, while ConsensusPartitionList
class contains results for
multiple top-value methods and multiple partitioning methods.
In the following example code, TCGA_GBM_subgroup.rds
is generated by the code
demonstrated here (Running cola analysis
is always time-consuming, so we use the object that has already be generated.).
download.file("https://jokergoo.github.io/cola_examples/TCGA_GBM/TCGA_GBM_subgroup.rds",
destfile = "TCGA_GBM_subgroup.rds", quiet = TRUE)
rl = readRDS("TCGA_GBM_subgroup.rds")
file.remove("TCGA_GBM_subgroup.rds")
Simply entering the variable name gives you the summary of the analysis and a list of functions that can be applied to this object:
rl
## A 'ConsensusPartitionList' object with 24 methods.
## On a matrix with 11268 rows and 173 columns.
## Top rows are extracted by 'SD, CV, MAD, ATC' methods.
## Subgroups are detected by 'hclust, kmeans, skmeans, pam, mclust, NMF' method.
## Number of partitions are tried for k = 2, 3, 4, 5, 6.
## Performed in total 30000 partitions by row resampling.
##
## Following methods can be applied to this 'ConsensusPartitionList' object:
## [1] "cola_report" "collect_classes" "collect_plots" "collect_stats"
## [5] "colnames" "functional_enrichment" "get_anno" "get_anno_col"
## [9] "get_classes" "get_matrix" "get_membership" "get_stats"
## [13] "is_best_k" "is_stable_k" "ncol" "nrow"
## [17] "rownames" "show" "suggest_best_k" "test_to_known_factors"
## [21] "top_rows_heatmap" "top_rows_overlap"
##
## You can get result for a single method by, e.g. object["SD", "hclust"] or object["SD:hclust"]
## or a subset of methods by object[c("SD", "CV")], c("hclust", "kmeans")]
To get results for a single top-value method and partitioning method, you can subset rl
by the name of the combination of the methods.
rl["SD:hclust"]
## A 'ConsensusPartition' object with k = 2, 3, 4, 5, 6.
## On a matrix with 11268 rows and 173 columns.
## Top rows (1000, 2000, 3000, 4000, 5000) are extracted by 'SD' method.
## Subgroups are detected by 'hclust' method.
## Performed in total 1250 partitions by row resampling.
## Best k for subgroups seems to be 2.
##
## Following methods can be applied to this 'ConsensusPartition' object:
## [1] "cola_report" "collect_classes" "collect_plots"
## [4] "collect_stats" "colnames" "compare_signatures"
## [7] "consensus_heatmap" "dimension_reduction" "functional_enrichment"
## [10] "get_anno" "get_anno_col" "get_classes"
## [13] "get_consensus" "get_matrix" "get_membership"
## [16] "get_param" "get_signatures" "get_stats"
## [19] "is_best_k" "is_stable_k" "membership_heatmap"
## [22] "ncol" "nrow" "plot_ecdf"
## [25] "rownames" "select_partition_number" "show"
## [28] "suggest_best_k" "test_to_known_factors"
Functions on ConsensusPartitionList
class that are important to use are:
cola_report()
: Generate a HTML report for the complete analysis.collect_classes()
: Plots consensus partition for every combination of methods. On top there is a
global consensus partition summarized from all single-method-level partitions, weighted by the mean
silhoutte scores.collect_plots()
: Collect plots for all methods.get_classes()
: The global consensus subgroup by taking subgroups from all methods together.get_stats()
: Extract the statistics for determining the best number of subgroups.suggest_best_k()
: Guess the best \(k\) for each method.test_to_known_factors()
: Apply tests to the annotations if provides. The test will be Chi-squared test or ANOVA depending on the data type of the annotation.top_rows_heatmap()
: Make heatmaps for top_n
rows under different top-value methods.top_rows_overlap()
: Make Venn-Euler diagram for the top_n
rows under different top-value methods.functional_enrichment()
: If rows can be associated to genes, it applies functional enrichment analysis.Functions on ConsensusPartition
class:
collect_classes()
: Make heatmaps for the consensus subgroups from all \(k\).collect_plots()
: Collect all plots for consensus heatmaps, membership heatmaps and signature heatmaps for all \(k\).consensus_heatmap()
: Make consensus heatmap.dimension_reduction()
: Make PCA/MDS/UMAP/t-SNE plot.get_classes()
: Get class labels for a specific \(k\).get_consensus()
: Get the consensus matrix for a specific \(k\).get_signatures()
: Make the heatmap for the signatures. get_stats()
: Extract the statistics for determining best number of subgroups.suggest_best_k()
: Guess the best \(k\).membership_heatmap()
: Make the membership heatmap.plot_ecdf()
: Plot the emperical CDF of the consensus matrix for all \(k\).select_partition_number()
: Make plots for all statistics for determining the best \(k\).test_to_known_factors()
: Apply tests to the annotations if provides. The test will be Fisher's exact test or ANOVA depending on the data type of the annotation.functional_enrichment()
: If rows can be associated to genes, it applies functional enrichment analysis.cola package provides rich visualizations for the results generated by a single method or multiple methods.
The object which is generated with a single top-value method and a single
partitioning method belongs to the class ConsensusPartition
. There are several
visualization functions that can be applied to it.
select_partition_number()
makes several plots to show
different statistics along with different \(k\), which helps to determine the
“best k”.
res = rl["MAD:kmeans"] # the ConsensusPartition object
select_partition_number(res)
The heatmap for the consensus matrix with a certain \(k\):
consensus_heatmap(res, k = 4)
The heatmap for the membership matrix with a certain \(k\):
membership_heatmap(res, k =4)
The dimension reduction plot with a certain \(k\):
dimension_reduction(res, k = 4)
## use UMAP
## Warning: failed creating initial embedding; using random embedding instead
The heatmap for the signature rows with a certain \(k\). The heatmap is split into two parts by columns. The left heatmap where the barplots on top are in black contains samples with silhouette scores larger than 0.5 and the right heatmap where the barplot son top are in grey contains samples with silhouette scores less than 0.5. Rows are automatically split by k-means.
get_signatures(res, k = 4)