Differential cell-type-specific allelic imbalance with airpart
Wancen Mu, Hirak Sarkar, Avi Srivastava, Kwangbom Choi, Rob Patro, Michael I. Love
10/29/2024
Abstract
Airpart identifies sets of genes displaying differential cell-type-specific allelic imbalance across cell types or states, utilizing single-cell allelic counts. It makes use of a generalized fused lasso with binomial observations of allelic counts to partition cell types by their allelic imbalance. Alternatively, a nonparametric method for partitioning cell types is offered. The package includes a number of visualizations and quality control functions for examining single cell allelic imbalance datasets.
Real data example
Vignette on Larsson 2019 data can be found here, which has allelic single-cell RNA-seq with 4 cell states.
Simulated data example I
The airpart package takes input data of counts from each of two alleles across genes (rows) and cells (columns) from a single-cell RNA-seq experiment.
For demonstration in the package vignette, we will simulate some data using makeSimulatedData function provided within the airpart package. We will examine the allelic counts and then perform QC steps before analyzing the data for allelic imbalance across groups of cells.
Simulation set-up
The simulated example dataset has 3 gene clusters with differential allelic imbalance (DAI):
- the first cluster has pairs of cell types with same allelic ratio with 0.2 and 0.8 (larger DAI)
- the second cluster has balanced allelic ratio
- the third cluster has pairs of cell types with same allelic ratio with 0.7 and 0.9 (smaller DAI)
Below we specify a number of simulation settings as arguments to the simulation function:
- the “noisy” cell count is 2
- the normal cell count is 10
- 4 cell types
- 20 cells within each cell type
- 25 genes within each gene cluster
- overdispersion parameter
thetainrbetabinomis 20 (higher is less dispersion)
library(airpart)
suppressPackageStartupMessages(library(SingleCellExperiment))
p.vec <- rep(c(0.2, 0.8, 0.5, 0.5, 0.7, 0.9), each = 2)
set.seed(2021)
sce <- makeSimulatedData(
mu1 = 2, mu2 = 10, nct = 4, n = 20,
ngenecl = 25, theta = 20, ncl = 3,
p.vec = p.vec
)## DataFrame with 3 rows and 4 columns
## ct1 ct2 ct3 ct4
## <numeric> <numeric> <numeric> <numeric>
## gene1 0.2 0.2 0.8 0.8
## gene26 0.5 0.5 0.5 0.5
## gene51 0.7 0.7 0.9 0.9##
## ct1 ct2 ct3 ct4
## 20 20 20 20## cell1 cell2 cell3 cell4 cell5
## gene1 0 2 0 1 0
## gene2 0 1 0 0 2
## gene3 0 0 1 0 0
## gene4 0 2 0 0 0
## gene5 0 1 0 1 0Required input data
In summary, airpart expects a SingleCellExperiment object with:
- discrete cell types recorded as a variable
xin thecolData(sce) - effect and non-effect allelic counts as assays
a1anda2
The allelic ratio is calculated as a1 / (a1 + a2).
Note: We assume that the cell types have been either provided by the experiment, or identified based on total count. We assume the allelic ratio was not used in determining the cell groupings in x.
## [1] "a1" "a2"## [1] ct1 ct1 ct1 ct1 ct1 ct1 ct1 ct1 ct1 ct1 ct1 ct1 ct1 ct1 ct1 ct1 ct1 ct1 ct1
## [20] ct1 ct2 ct2 ct2 ct2 ct2 ct2 ct2 ct2 ct2 ct2 ct2 ct2 ct2 ct2 ct2 ct2 ct2 ct2
## [39] ct2 ct2 ct3 ct3 ct3 ct3 ct3 ct3 ct3 ct3 ct3 ct3 ct3 ct3 ct3 ct3 ct3 ct3 ct3
## [58] ct3 ct3 ct3 ct4 ct4 ct4 ct4 ct4 ct4 ct4 ct4 ct4 ct4 ct4 ct4 ct4 ct4 ct4 ct4
## [77] ct4 ct4 ct4 ct4
## Levels: ct1 ct2 ct3 ct4Create allelic ratio matrix
In the preprocess step, we add a pseudo-count for gene clustering and visualization (not used for inference later on allelic imbalance though, which uses original allelic counts). From the heatmap, we can clearly identify the three gene clusters (across rows), and we also see cell type differences (across columns). Within each cell type, there are some cells with noisier estimates (lower total count) than others. Again, the allelic ratio tells us how much more of the a1 allele is expressed, with 1 indicating all of the expression coming from the a1 allele and 0 indicating all of the expression coming from the a2 allele.
Quality control steps
QC on cells
We recommend both QC on cells and on genes. We begin with cell allelic ratio quality control. For details on these metrics, see ?cellQC.
## DataFrame with 80 rows and 7 columns
## x sum detected spikePercent filter_sum filter_detected
## <factor> <numeric> <numeric> <numeric> <logical> <logical>
## cell1 ct1 2.19590 61 0 TRUE TRUE
## cell2 ct1 2.23045 64 0 TRUE TRUE
## cell3 ct1 2.09342 57 0 TRUE TRUE
## cell4 ct1 2.18184 59 0 TRUE TRUE
## cell5 ct1 2.19590 63 0 TRUE TRUE
## ... ... ... ... ... ... ...
## cell76 ct4 2.88309 75 0 TRUE TRUE
## cell77 ct4 2.83187 73 0 TRUE TRUE
## cell78 ct4 2.86153 75 0 TRUE TRUE
## cell79 ct4 2.89763 74 0 TRUE TRUE
## cell80 ct4 2.83123 73 0 TRUE TRUE
## filter_spike
## <logical>
## cell1 TRUE
## cell2 TRUE
## cell3 TRUE
## cell4 TRUE
## cell5 TRUE
## ... ...
## cell76 TRUE
## cell77 TRUE
## cell78 TRUE
## cell79 TRUE
## cell80 TRUENow define cell filtering automatically or users can manually filter out based on sum,detected and spikePercent.
QC on genes
We also recommend QC on genes for allelic ratio analysis. Note that we require genes to be expressed in at least 25% of cells within each cell type and the genes to have high allelic imbalance variation across cell types. The following code chunk is recommended (not evaluated here though). If users want to estimate homogeneous cell type allelic imbalance, they can set sd = 0 and examine the below summary step to find interesting gene clusters with weighted mean deviating from 0.5.
Gene clustering
airpart provides a function to cluster genes by their allelic imbalance profile across cells (not using cell grouping information, e.g. sce$x). We then recommend providing genes within a cluster to the partition function. Clustering genes increases power for detecting cell type partitions, and improves speed as it reduces the number of times the partition must be estimated.
We provide two methods for gene clustering.
- Gaussian Mixture modeling
Gaussian mixture modeling is the default method for gene clustering. The scatter plot is shown based on top 2 PCs of the smoothed allelic ratio data. The argument plot=FALSE can be used to avoid showing the plot.
## model-based optimal number of clusters: 3
## [1] 25 25 25- Hierarchical clustering
## [1] 25 25 25In this simulated dataset case, the clustering is very similar, but on allelic scRNA-seq datasets, we have found improved clustering with the Gaussian mixture model approach (more similar genes within cluster, based on visual inspection of PCA plot and of allelic ratio heatmaps).
Running airpart for allelic imbalance across groups of cells
Simple summary table of allelic ratio
We first quickly look at the weighted mean of allelic ratio for each gene cluster. From this step we will identify the interesting gene clusters. The mean is calculated, weighting the information from each gene x cell element of the matrices by the total count.
## $`gene cluster 1 with 25 genes`
## x weighted.mean mean var
## 1 ct1 0.2084022 0.2056936 0.06355708
## 2 ct2 0.1981464 0.1879503 0.05634768
## 3 ct3 0.8133540 0.8090369 0.05572735
## 4 ct4 0.8054237 0.8136062 0.05143953
##
## $`gene cluster 2 with 25 genes`
## x weighted.mean mean var
## 1 ct1 0.5119248 0.5096426 0.09555925
## 2 ct2 0.4949174 0.5000794 0.09566643
## 3 ct3 0.4961165 0.5135395 0.09642713
## 4 ct4 0.5048356 0.4883957 0.08759873
##
## $`gene cluster 3 with 25 genes`
## x weighted.mean mean var
## 1 ct1 0.7085658 0.7216087 0.07258102
## 2 ct2 0.6942398 0.6803795 0.08580046
## 3 ct3 0.9117748 0.8952586 0.03821103
## 4 ct4 0.8956159 0.9017706 0.02942587The following step is a complement of the QC on genes step. We recommend users only run airpart when the largest ordered allelic ratio difference > 0.05 for speed concerns. We find that the allelic ratio of most of the gene clusters in such cases (small absolute allelic ratio differences) won’t provide enough evidence to detect differential allelic imbalance.
sapply(1:length(summary), function(i) {
inst <- summary[[i]]
inst_order <- inst[order(inst$weighted.mean), ]
max(diff(inst_order$weighted.mean)) > 0.05
})## [1] TRUE FALSE TRUEExperiment-wide beta-binomial over-dispersion
We recommend examining the experiment-wide beta-binomial over-dispersion, which helps to inform whether to use a binomial likelihood or a nonparametric approach to partitioning the cell types by allelic imbalance.
We focus on the first gene cluster (if a gene cluster is not provided, estDisp will choose the largest cluster).
The blue trend line gives the typical values of over-dispersion across all the genes in the cluster, and across all the cell types (accounting for differences across the cell types in the expected ratio).
## `geom_smooth()` using method = 'loess' and formula = 'y ~ x'
Modeling using fused lasso with binomial likelihood
airpart offers a method for partitioning cell types using the generalized fused lasso with binomial likelihood, as implemented in the smurf package. Cell types are merged based on their similarity of allelic ratios, accounting for excess variance on the ratio from low counts. The penalization is determined using deviance on held-out data, with a 1 SE cross-validation rule for favoring smaller models (more fused cell types).
The fusion step can also taken into account both cell-level and gene-level baseline effects, through the use of a formula (see ?fusedLasso for example).
The partition groups and the penalty \(\lambda\) from the fused lasso are stored in the metadata:
| part1 | part2 | x | coef1 | coef2 |
|---|---|---|---|---|
| 1 | 1 | ct1 | -1.366500 | -1.366500 |
| 1 | 1 | ct2 | -1.366500 | -1.366500 |
| 2 | 2 | ct3 | 1.447169 | 1.447169 |
| 2 | 2 | ct4 | 1.447169 | 1.447169 |
## part1 part2
## 0.2053138 0.2053138Above, ncores is the number of CPU used for parallelization. As a guide, one can specify niter=5 when the cts weighted allelic ratio difference is smaller than 0.1, in order to provide additional estimator robustness.
Consensus partition
If you run niter > 1, you can use our consensus partition function to derive the final partition. This function makes use of ensemble consensus clustering via the clue package.
| part | x |
|---|---|
| 1 | ct1 |
| 1 | ct2 |
| 2 | ct3 |
| 2 | ct4 |
Modeling using pairwise Mann-Whitney-Wilcoxon extension
An alternative to the fused lasso with binomial likelihood is an extension we have implemented wherein all pairs cell types are compared with Mann-Whitney-Wilcoxon rank sum tests. In practice, we find that when the allelic counts deviates strongly from a binomial (e.g. large over-dispersion, small values of theta), the wilcoxExt function can offer improved performance, in terms of recovery of the true partition of cell types by allelic imbalance. The partition is decided based on a loss function motivated by the Bayesian Information Criteria.
thrs <- 10^seq(from = -2, to = -0.4, by = 0.2)
sce_sub_w <- wilcoxExt(sce, genecluster = 1, threshold = thrs)
knitr::kable(metadata(sce_sub_w)$partition, row.names = FALSE)| part | x |
|---|---|
| 1 | ct1 |
| 1 | ct2 |
| 2 | ct3 |
| 2 | ct4 |
## [1] 0.01Calculating allelic ratio estimates via beta-binomial model
After airpart determines a partition of cell types either by the fused lasso with binomial likelihood or the nonparametric approach described above, it uses those fused lasso estimates or weighted means as the center of a Cauchy prior for posterior estimation of allelic ratios per cell type and per gene. Posterior mean and credible intervals are provided. The posterior inference makes use of a beta-binomial likelihood, and a moderated estimate of the over-dispersion. The prior from the partition and the moderated estimate of over-dispersion are provided to the apeglm function from the Bioconductor package of the same name.
Note that the estimates and credible intervals are not equal for cell types in the same partition and for genes, because in this step we re-estimate the conditional cell type means per cell type (not per partition) and account for each gene’s moderated estimate of over-dispersion.
## svalue shown in columns per cell type
Allelic ratio estimates (ar) as well as svalue and credible interval (lower and upper) are stored in rowData. Can use extractResult function to derive them.
| ct1 | ct2 | ct3 | ct4 | |
|---|---|---|---|---|
| gene1 | 0.253 | 0.253 | 0.758 | 0.758 |
| gene2 | 0.186 | 0.186 | 0.790 | 0.790 |
| gene3 | 0.241 | 0.241 | 0.801 | 0.801 |
| gene4 | 0.289 | 0.289 | 0.816 | 0.816 |
| gene5 | 0.210 | 0.210 | 0.815 | 0.815 |
Derive statistical inference
To derive statistical inference of allelic imbalance(AI), we suggest a low aggregate probability of false-sign-or-small (FSOS) events (s-value < .005) or examine credible intervals not overlapping an allelic ratio of 0.5. Here all selected 5 genes demonstrated AI on each cell type.
## ct1 ct2 ct3 ct4
## gene1 TRUE TRUE TRUE TRUE
## gene2 TRUE TRUE TRUE TRUE
## gene3 TRUE TRUE TRUE TRUE
## gene4 TRUE TRUE TRUE TRUE
## gene5 TRUE TRUE TRUE TRUETo derive statistical inference of dynamic AI(DAI), raw p values from likelihood ratio test(LRT) and Benjamini-Hochberg (BH) corrected p value are stored in p.value and adj.p.value, respectively. Here all 25 genes demonstrated DAI across cells.
## [1] TRUE TRUE TRUE TRUE TRUE TRUE TRUE TRUE TRUE TRUE TRUE TRUE TRUE TRUE TRUE
## [16] TRUE TRUE TRUE TRUE TRUE TRUE TRUE TRUE TRUE TRUEAllelic ratio partition and posterior inference, example II
To demonstrate showing partition results on a heatmap, let’s make a more complex simulation, with 8 cell types, in 3 true groups by allelic ratio. In the code below, we construct the more complex simulation, run preprocessing, and examine the allelic ratio heatmap.
nct <- 8
p.vec <- (rep(c(
-3, 0, -3, 3,
rep(0, nct / 2),
2, 3, 4, 2
), each = 2) + 5) / 10
sce <- makeSimulatedData(
mu1 = 2, mu2 = 10, nct = nct, n = 30,
ngenecl = 50, theta = 20, ncl = 3, p.vec = p.vec
)
sce <- preprocess(sce)
cellQCmetrics <- cellQC(sce, mad_detected = 4)
keep_cell <- (
cellQCmetrics$filter_sum | # sufficient features (genes)
cellQCmetrics$filter_detected | # sufficient molecules counted
# sufficient features expressed compared to spike genes,
# high quality cells
cellQCmetrics$filter_spike
)
sce <- sce[, keep_cell]
featureQCmetric <- featureQC(sce)
keep_feature <- (featureQCmetric$filter_celltype &
featureQCmetric$filter_sd &
featureQCmetric$filter_spike)
sce <- sce[keep_feature, ]
makeHeatmap(sce)
We can then perform gene clustering:
## model-based optimal number of clusters: 3
##
## 1 2 3
## 50 16 50We check for experiment-wide beta-binomial over-dispersion. Note that larger theta (y-axis) corresponds to less over-dispersion.
We focus on the first gene cluster (if a gene cluster is not provided, estDisp will choose the largest cluster).
## `geom_smooth()` using method = 'loess' and formula = 'y ~ x'
We identify an interesting gene cluster and run the fused lasso.
| part | x | coef |
|---|---|---|
| 1 | ct1 | -1.3883646 |
| 1 | ct2 | -1.3883646 |
| 2 | ct3 | -0.0226667 |
| 2 | ct4 | -0.0226667 |
| 1 | ct5 | -1.3883646 |
| 1 | ct6 | -1.3883646 |
| 3 | ct7 | 1.4140601 |
| 3 | ct8 | 1.4140601 |
Next we estimate allelic ratios per cell type and per gene, with credible intervals. For demonstration, we subset to the first 10 genes.
We plot all cell types together, but one can set ctpoi=c(1,3,7) to limit the cell types to be plotted when there are too many cell types. And one can set genepoi=c(1,3,7) or genepoi=c("gene1","gene3","gene7") to only plot selected genes.
## svalue shown in columns per cell type
| ct1 | ct2 | ct3 | ct4 | ct5 | ct6 | ct7 | ct8 | |
|---|---|---|---|---|---|---|---|---|
| gene1 | 0.194 | 0.194 | 0.510 | 0.510 | 0.194 | 0.194 | 0.814 | 0.814 |
| gene2 | 0.215 | 0.215 | 0.520 | 0.520 | 0.215 | 0.215 | 0.794 | 0.794 |
| gene3 | 0.213 | 0.213 | 0.502 | 0.502 | 0.213 | 0.213 | 0.808 | 0.808 |
| gene4 | 0.215 | 0.215 | 0.524 | 0.524 | 0.215 | 0.215 | 0.808 | 0.808 |
| gene5 | 0.217 | 0.217 | 0.498 | 0.498 | 0.217 | 0.217 | 0.789 | 0.789 |
| gene6 | 0.203 | 0.203 | 0.456 | 0.456 | 0.203 | 0.203 | 0.784 | 0.784 |
| gene7 | 0.180 | 0.180 | 0.490 | 0.490 | 0.180 | 0.180 | 0.875 | 0.875 |
| gene8 | 0.228 | 0.228 | 0.483 | 0.483 | 0.228 | 0.228 | 0.781 | 0.781 |
| gene9 | 0.189 | 0.189 | 0.543 | 0.543 | 0.189 | 0.189 | 0.812 | 0.812 |
| gene10 | 0.190 | 0.190 | 0.499 | 0.499 | 0.190 | 0.190 | 0.823 | 0.823 |
A violin plot with posterior mean allelic ratios (one estimate per gene) on the y-axis:
## Joining with `by = join_by(x)`
Finally, a heatmap as before, but now with the cell types grouped according to the partition:
The heatmap can also be shown ordered by cell type.
Session Info
## R version 4.4.1 (2024-06-14)
## Platform: x86_64-pc-linux-gnu
## Running under: Ubuntu 24.04.1 LTS
##
## Matrix products: default
## BLAS: /home/biocbuild/bbs-3.20-bioc/R/lib/libRblas.so
## LAPACK: /usr/lib/x86_64-linux-gnu/lapack/liblapack.so.3.12.0
##
## locale:
## [1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C
## [3] LC_TIME=en_GB LC_COLLATE=C
## [5] LC_MONETARY=en_US.UTF-8 LC_MESSAGES=en_US.UTF-8
## [7] LC_PAPER=en_US.UTF-8 LC_NAME=C
## [9] LC_ADDRESS=C LC_TELEPHONE=C
## [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C
##
## time zone: America/New_York
## tzcode source: system (glibc)
##
## attached base packages:
## [1] stats4 stats graphics grDevices utils datasets methods
## [8] base
##
## other attached packages:
## [1] SingleCellExperiment_1.28.0 SummarizedExperiment_1.36.0
## [3] Biobase_2.66.0 GenomicRanges_1.58.0
## [5] GenomeInfoDb_1.42.0 IRanges_2.40.0
## [7] S4Vectors_0.44.0 BiocGenerics_0.52.0
## [9] MatrixGenerics_1.18.0 matrixStats_1.4.1
## [11] airpart_1.14.0
##
## loaded via a namespace (and not attached):
## [1] pbapply_1.7-2 gridExtra_2.3 rlang_1.1.4
## [4] magrittr_2.0.3 clue_0.3-65 GetoptLong_1.0.5
## [7] smurf_1.1.5 scater_1.34.0 compiler_4.4.1
## [10] mgcv_1.9-1 png_0.1-8 vctrs_0.6.5
## [13] pkgconfig_2.0.3 shape_1.4.6.1 crayon_1.5.3
## [16] fastmap_1.2.0 magick_2.8.5 backports_1.5.0
## [19] XVector_0.46.0 labeling_0.4.3 scuttle_1.16.0
## [22] utf8_1.2.4 rmarkdown_2.28 forestplot_3.1.5
## [25] ggbeeswarm_0.7.2 UCSC.utils_1.2.0 purrr_1.0.2
## [28] catdata_1.2.4 xfun_0.48 glmnet_4.1-8
## [31] zlibbioc_1.52.0 cachem_1.1.0 beachmat_2.22.0
## [34] jsonlite_1.8.9 highr_0.11 DelayedArray_0.32.0
## [37] BiocParallel_1.40.0 irlba_2.3.5.1 parallel_4.4.1
## [40] cluster_2.1.6 R6_2.5.1 bslib_0.8.0
## [43] RColorBrewer_1.1-3 jquerylib_0.1.4 numDeriv_2016.8-1.1
## [46] Rcpp_1.0.13 iterators_1.0.14 knitr_1.48
## [49] Matrix_1.7-1 splines_4.4.1 tidyselect_1.2.1
## [52] viridis_0.6.5 abind_1.4-8 yaml_2.3.10
## [55] doParallel_1.0.17 codetools_0.2-20 lattice_0.22-6
## [58] tibble_3.2.1 plyr_1.8.9 withr_3.0.2
## [61] coda_0.19-4.1 evaluate_1.0.1 survival_3.7-0
## [64] lpSolve_5.6.21 circlize_0.4.16 mclust_6.1.1
## [67] pillar_1.9.0 checkmate_2.3.2 foreach_1.5.2
## [70] generics_0.1.3 emdbook_1.3.13 ggplot2_3.5.1
## [73] munsell_0.5.1 scales_1.3.0 glue_1.8.0
## [76] tools_4.4.1 apeglm_1.28.0 BiocNeighbors_2.0.0
## [79] ScaledMatrix_1.14.0 mvtnorm_1.3-1 Cairo_1.6-2
## [82] grid_4.4.1 tidyr_1.3.1 bbmle_1.0.25.1
## [85] bdsmatrix_1.3-7 colorspace_2.1-1 nlme_3.1-166
## [88] GenomeInfoDbData_1.2.13 beeswarm_0.4.0 BiocSingular_1.22.0
## [91] vipor_0.4.7 rsvd_1.0.5 cli_3.6.3
## [94] fansi_1.0.6 viridisLite_0.4.2 S4Arrays_1.6.0
## [97] ComplexHeatmap_2.22.0 dplyr_1.1.4 gtable_0.3.6
## [100] dynamicTreeCut_1.63-1 sass_0.4.9 digest_0.6.37
## [103] ggrepel_0.9.6 SparseArray_1.6.0 farver_2.1.2
## [106] rjson_0.2.23 htmltools_0.5.8.1 lifecycle_1.0.4
## [109] httr_1.4.7 GlobalOptions_0.1.2 MASS_7.3-61